- Accueil
- Electricité - Eclairage & Domotique
- Eclairage intérieur
- Ruban LED
- Extension ruban LED - 100 cm - Colours
Extension ruban LED - 100 cm - Colours
Extension ruban LED - 100 cm est évalué de 5 de 4.
Colours 
Cette extension pour ruban lumineux LED vous permet d'obtenir la longueur d'éclairage que vous souhaitez en ajoutant facilement cette extension au ruban lumineux existant.
Informations du produit
Référence : 3663602762157
Code : 842162
Description :
Cette extension pour ruban lumineux LED vous permet d'obtenir la longueur d'éclairage que vous souhaitez en ajoutant facilement cette extension au ruban lumineux existant.
Documentation
Avis clients
Rated 1 de 5 de Madmg5 par Don't bother Yes it was on clearance and on opening the package its clear why, when it says only fixings supplied they mean ONLY fixings. The description says it has an in line switch well it doesn't. It is simply strip of leds and a lead to connect more together- no means of powering it. Total waste of money and disgraceful description
Date de publication: 2023-05-19
Rated 5 de 5 de 6969quandaledinglehereheh par This product is breathtakingly astonishing! I brought this 4 years ago and it has been my go to light bulb ever since. It has never let me down!
Date de publication: 2022-05-27
Rated 5 de 5 de Anonyme par This product is the best this product is flabagasting this is the best led strips every just the best
Date de publication: 2022-05-27
Rated 1 de 5 de Am still Trog par Urine poor product of the year. For your money you get 1m of LED strip a straight and a 90' connector, the 90' connector is just two straight connectors with a straight conductive strip between them. While the LED strip seems to be quite good the joiners are dreadful. To use them you have to strip off about 1/4" of the clear rubbery plastic bonded to the front of the lighting strip. The instructions show this being done with a pair of scissors, God knows how you are supposed to do this. I found that I could pry the rubbery plastic off the strip with the conductors and LEDs by holding the end of the tape between my finger and thumb and cutting towards me quite hard with a scalpel, a process that I was not that keen on. Once you have stripped both tapes you can fit then into the joiner, to do this you need to open the joiner, and lift the four metal tabs inside with perhaps the scalpel blade. You then slide the stripped end of the tape under two barely visible plastic knibbs and under the four raised metal tabs. You will probably find that sripping the tape has widened it slightly so before trying to put the tape in cut a fraction of a French mm off each side of the tape. Once the tape is in close the connector and hope it works 50:50 chance. Note that the shop made joints in the 90' connector also have only a 50:50 chance of being OK so to get a good connection using a connector with 4 joints you will need quite a bit of luck.
Date de publication: 2021-04-20
